Adhesives
Crafco Deery Cold Joint Adhesive Per Pound
80407
DEERY Cold Joint Adhesive is a single component, hot applied, polymer-modified asphalt compound. It is composed of specialty polymers and inert stabilizers blended into a compatible asphalt. This blend of material produces a compound with excellent adhesive properties and is very flexible at low temperatures.
Crafco Deery Cold Joint Adhesive Per Pound
80407
DEERY Cold Joint Adhesive is a single component, hot applied, polymer-modified asphalt compound. It is composed of specialty polymers and inert stabilizers blended into a compatible asphalt. This blend of material produces a compound with excellent adhesive properties and is very flexible at low temperatures.
DEERY Cold Joint Adhesive is applied to longitudinal cold construction joints in asphalt concrete pavements. The
tenacious bond created by the joint adhesive coupled with its waterproofing property, increases the durability and life expectancy
of the joint.
Material shall be heated in a hot-oil jacketed melter capable of constant mechanical agitation and equipped with a
calibrated thermometer to monitor sealant temperature. Material shall be heated to and maintained at the Recommended
Application Temperature during use. Material can be cooled and then reheated, but only if prolonged heating is avoided.
Prolonged heating at or above Recommended Application Temperature may severely damage product. If overheating damage
occurs, immediately drain machine completely and refill with new material.
Cold Joint Adhesive is pre-reacted and can be applied immediately after heating to Recommended
Application Temperature. With pavement temperature at 40°F (4°C) or higher, place material onto the exposed edge joint face by means of a hand-held pour pot, wheeled push bander or wand applicator. Installation of adhesive is best using pressurized wand applicator Pavement may be warmed to 40°F (4°C) or higher with a Hot Air Lance.
